Copying onto OHP Transparencies

Usually only one side of OHP transparencies can be used for printing. Be sure to load them with the print side up.
The Duplex function cannot be used with OHP transparencies. If the Duplex function is specified, cancel the setting.

Load the paper face up in the multi bypass tray (Tray 7).

Press [Tray 7].

Press [Paper Size].

Specify the paper size, and then press [OK].

Press [Special Paper].

Press [OHP (Transparency)], and then press [OK].

Place the originals, and then press the [Start] key.

When copying onto OHP transparencies, remove copied sheets one by one.
For details about the sizes of OHP transparencies that can be used, see "Recommended Paper Sizes and Types", Paper Specifications and Adding Paper.
You can also load OHP transparencies into the paper trays and make copies on it. Be sure to specify the paper type under [Tray Paper Settings]. For details, see "Changing Tray Paper Settings", Paper Settings.