Top Page > Maintenance and Specifications > Specifications > Specifications for the Main Unit

Specifications for the Main Unit

Previous Next

Configuration:

Desktop

Hard disk

250 GB or more

Photosensitivity type:

OPC drum

Original scanning:

One-dimensional solid scanning system through CCD

Copy process:

Laser beam scanning and electro-photographic printing

Development:

Dry two-component magnetic brush development system

Fusing:

Direct Heating (DH) fusing

Resolution:

Scanning originals: 600 dpi
Copying: 600 dpi

Exposure glass:

Stationary original exposure type

Original reference position:

Rear left corner

Warm-up time (23 °C (73.4 °F), rated voltage)

(mainly Europe)
- When using a model with the standard operation panel
  - Type 1: 19 seconds
  - Type 2: 19 seconds
  - Type 3: 20 seconds
  - Type 4: 16 seconds
  - Type 5: 16 seconds ^*1
- When using a model with the Smart Operation Panel
  - Type 1: 69 seconds
  - Type 2: 69 seconds
  - Type 3: 60 seconds
  - Type 4: 60 seconds
  - Type 5: 60 seconds ^*1
(mainly Asia)
- Type 1: 19 seconds
- Type 2: 19 seconds
- Type 3: 20 seconds
- Type 4: 16 seconds
- Type 5: 16 seconds ^*1
(mainly North America)
- Type 1: 19 seconds
- Type 2: 19 seconds
- Type 3: 20 seconds
- Type 4: 16 seconds
- Type 5: 16 seconds ^*1

*1 The warm-up time may differ depending on the functions you use and options you install.

Originals:

Sheet, book, three-dimensional object

Maximum original size:

(mainly Europe and Asia)
A3
(mainly North America)
11 × 17

Paper size:

Tray 1:
A4, 8¹/₂ × 11, A5, B5 JIS
The paper tray fence is fixed. If you wish to change the size of paper placed in this tray, contact your service representative.
Tray 2:
A3, A4, A5, A6, B4 JIS, B5 JIS, B6 JIS,
11 × 17, 8¹/₂ × 14, 8¹/₂ × 13, 8¹/₂ × 11, 8¹/₄ × 14, 8¹/₄ × 13, 8 × 13, 8 × 10, 7¹/₄ × 10¹/₂, 5¹/₂ × 8¹/₂, 4¹/₈ × 9¹/₂, 3⁷/₈ × 7¹/₂, C5 Env, C6 Env, DL Env,
8K, 16K, 12 × 18, 11 × 15, 10 × 14, SRA3
Tray 2 (custom size):
Vertical: 90.0–320.0 mm (3.55–12.59 inches)
Horizontal: 148.0–457.2 mm (5.83–18.00 inches)
When loading paper with a vertical width of more than 304.8 mm (12.0 inches) into Tray 2, use paper that has a horizontal length of 450 mm (17.8 inches) or less.
Bypass tray:
A3, A4, A5, A6, B4 JIS, B5 JIS, B6 JIS,
11 × 17, 8¹/₂ × 14, 8¹/₂ × 13, 8¹/₂ × 11, 8¹/₄ × 14, 8¹/₄ × 13, 8 × 13, 8 × 10, 7¹/₄ × 10¹/₂, 5¹/₂ × 8¹/₂,
4¹/₈ × 9¹/₂, 3⁷/₈ × 7¹/₂, C5 Env, C6 Env, DL Env, 8K, 16K, 12 × 18, 11 × 15, 10 × 14, SRA3, SRA4
Bypass tray (custom size):
Vertical: 90.0–320.0 mm (3.55–12.59 inches)
Horizontal: 148.0–457.2 mm (5.83–18.00 inches)
In printer or facsimile mode, the maximum horizontal length of the custom size is 600.0 mm (23.62 inches).
Duplex:
A3, A4, A5, A6, B4 JIS, B5 JIS, B6 JIS,
11 × 17, 8¹/₂ × 14, 8¹/₂ × 13, 8¹/₂ × 11, 8¹/₄ × 14, 8¹/₄ × 13, 8 × 13, 8 × 10, 7¹/₄ × 10¹/₂, 5¹/₂ × 8¹/₂
8K, 16K, 12 × 18, 11 × 15, 10 × 14, SRA3, SRA4
Duplex (custom size):
Vertical: 90.0–320.0 mm (3.55–12.59 inches)
Horizontal: 148.0–457.2 mm (5.83–18.00 inches)

Paper weight:

Paper trays: 52–300 g/m² (14 lb. Bond–110 lb. Cover)
Bypass: 52–300 g/m² (14 lb. Bond–110 lb. Cover)
Duplex: 52–256 g/m² (14 lb. Bond–140 lb. Index)

For details about and recommendations concerning thick paper, see "Thick Paper", Paper Specifications and Adding Paper.

Missing image area (Copier):

Leading edge: 4.2 ± 1.5 mm (0.17 ± 0.06 inches)
Trailing edge: 0.5–6.0 mm (0.02–0.24 inches) (3.0–6.0 mm (0.12–0.24 inches) in Duplex mode)
Left and right edges: 0.5–4.0 mm (0.02–0.16 inches)

First copy/print time:

Type 1
- Full color: 7.3 seconds
- B&W: 4.6 seconds
Type 2
- Full color: 7.3 seconds
- B&W: 4.6 seconds
Type 3
- Full color: 5.7 seconds
- B&W: 4.0 seconds
Type 4
- Full color: 4.5 seconds
- B&W: 3.1 seconds
Type 5
- Full color: 4.5 seconds
- B&W: 3.1 seconds

(A4, 8¹/₂ × 11, delivered face down, feeding from tray 1, on the exposure glass)

Copy/print speed (Full Color / B&W):

Type 1: 30 sheets/minute (A4, 8¹/₂ × 11)
Type 2: 35 sheets/minute (A4, 8¹/₂ × 11)
Type 3: 45 sheets/minute (A4, 8¹/₂ × 11)
Type 4: 55 sheets/minute (A4, 8¹/₂ × 11)
Type 5: 60 sheets/minute (A4, 8¹/₂ × 11)

Reproduction ratio:

(mainly Europe and Asia)
Preset reproduction ratios (%):
- Enlargement: 400, 200, 141, 122, 115
- Full size: 100
- Reduction: 93, 82, 75, 71, 65, 50, 25
(mainly North America)
Preset reproduction ratios (%):
- Enlargement: 400, 200, 155, 129, 121
- Full size: 100
- Reduction: 93, 85, 78, 73, 65, 50, 25
Zoom: From 25–400% in increments of 1%

Maximum continuous copy run:

999 sheets

Paper capacity (80 g/m², 20 lb. Bond):

Tray 1, 2: 550 sheets
Bypass tray: 100 sheets

Power requirements:

(mainly Europe and Asia)
220–240 V, 8 A, 50/60 Hz
(mainly North America)
120–127 V, 12 A, 60 Hz

Power consumption

(mainly Europe and Asia)

Main unit only

	Type 1	Type 2	Type 3	Type 4	Type 5
Ready	64 W	64 W	96 W	96 W	96 W
During printing	515 W	515 W	758 W	959 W	959 W
Maximum	1,700 W or less	1,700 W or less	1,850 W or less	1,850 W or less	1,850 W or less

The power level when the main switch is turned off and the power cord is plugged into an outlet: 1 W or less

Complete system

Type 1

Type 2

Type 3

Type 4

Type 5

Maximum

1,700 W or less

1,700 W or less

1,850 W or less

1,850 W or less

1,850 W or less
- The complete system of Type 1 and 2 consists of the main unit, ARDF, lower paper trays, internal tray 2, large capacity tray (LCT), bridge unit, Booklet Finisher SR3150, fax unit, two extra G3 interface unit, and wireless LAN board.
- The complete system of Type 3, 4, and 5 consists of the main unit, one-pass duplex scanning ADF, lower paper trays, internal tray 2, large capacity tray (LCT), bridge unit, Booklet Finisher SR3170, fax unit, two extra G3 interface unit, and wireless LAN board.

	Type 1	Type 2	Type 3	Type 4	Type 5
Maximum	1,700 W or less	1,700 W or less	1,850 W or less	1,850 W or less	1,850 W or less

(mainly North America)

Main unit only

	Type 1	Type 2	Type 3	Type 4	Type 5
Ready	78 W	78 W	107 W	107 W	107 W
During printing	515 W	515 W	758 W	959 W	959 W
Maximum	1,584 W or less	1,584 W or less	1,584 W or less	1,584 W or less	1,584 W or less

The power level when the main switch is turned off and the power cord is plugged into an outlet: 1 W or less

Complete system

Type 1

Type 2

Type 3

Type 4

Type 5

Maximum

1,584 W or less

1,584 W or less

1,584 W or less

1,584 W or less

1,584 W or less
- The complete system of Type 1 and 2 consists of the main unit, ARDF, lower paper trays, internal tray 2, large capacity tray (LCT), bridge unit, Booklet Finisher SR3150, fax unit, two extra G3 interface unit, and wireless LAN board.
- The complete system of Type 3, 4, and 5 consists of the main unit, one-pass duplex scanning ADF, lower paper trays, internal tray 2, large capacity tray (LCT), bridge unit, Booklet Finisher SR3170, fax unit, two extra G3 interface unit, and wireless LAN board.

	Type 1	Type 2	Type 3	Type 4	Type 5
Maximum	1,584 W or less	1,584 W or less	1,584 W or less	1,584 W or less	1,584 W or less

Dimensions:

(mainly Europe)
- Models equipped with the ARDF (W × D × H up to ADF):
  587 × 685 × 913 mm (23.2 × 27.0 × 36.0 inches)
- Models equipped with the one-pass duplex scanning ADF (W × D × H up to ADF):
  587 × 685 × 963 mm (23.2 × 27.0 × 38.0 inches)
(mainly Asia)
- Type 1, 2 (W × D × H up to ARDF):
  587 × 685 × 913 mm (23.2 × 27.0 × 36.0 inches)
- Type 3, 4 (W × D × H up to exposure glass):
  587 × 685 × 788 mm (23.2 × 27.0 × 31.1 inches)
- Type 5 (W × D × H up to one-pass duplex scanning ADF):
  587 × 685 × 963 mm (23.2 × 27.0 × 38.0 inches)
(mainly North America)
- Type 1, 2 (W × D × H up to ARDF):
  587 × 685 × 913 mm (23.2 × 27.0 × 36.0 inches)
- Type 3, 4, 5 (W × D × H up to one-pass duplex scanning ADF):
  587 × 685 × 963 mm (23.2 × 27.0 × 38.0 inches)

Space for main unit (W × D):

1,149 × 1,236 mm (45.3 × 48.7 inches) (including the bypass tray and output trays)

Noise emission

Sound power level:

Main unit only

Type 1

Type 2

Type 3

Type 4

Type 5

Stand-by

35 dB (A) or less

Copying

B&W: 60.8 dB (A)

Color: 62.1 dB (A)

B&W: 61.3 dB (A)

Color: 62.6 dB (A)

B&W: 63.1 dB (A)

Color: 64.1 dB (A)

B&W: 64.6 dB (A)

Color: 66.3 dB (A)

B&W: 65.4 dB (A)

Color: 66.3 dB (A)

Complete system

	Type 1	Type 2	Type 3	Type 4	Type 5
Stand-by	35 dB (A) or less	35 dB (A) or less	35 dB (A) or less	35 dB (A) or less	35 dB (A) or less
Copying	71.0 dB (A)	71.1 dB (A)	71.9 dB (A)	72.4 dB (A)	73.2 dB (A)

Sound pressure level:

Main unit only

Type 1

Type 2

Type 3

Type 4

Type 5

Stand-by

20 dB (A) or less

Copying

B&W: 48.8 dB (A)

Color: 49.7 dB (A)

B&W: 50 dB (A)

Color: 50.4 dB (A)

B&W: 51.8 dB (A)

Color: 52.7 dB (A)

B&W: 53 dB (A)

Color: 54.1 dB (A)

B&W: 52.6 dB (A)

Color: 53.5 dB (A)

Complete system

	Type 1	Type 2	Type 3	Type 4	Type 5
Stand-by	20 dB (A) or less	20 dB (A) or less	20 dB (A) or less	20 dB (A) or less	20 dB (A) or less
Copying	56.6 dB (A)	56.7 dB (A)	57.7 dB (A)	57.9 dB (A)	58.6 dB (A)

Sound power level and sound pressure level are actual values measured in accordance with ISO 7779.
Sound pressure level is measured from the position of the bystander.
The complete system of Type 1 and 2 consists of the main unit, ARDF, lower paper trays, internal tray 2, large capacity tray (LCT), bridge unit, and Booklet Finisher SR3150.
The complete system of Type 3 and 4 consists of the main unit, ARDF, lower paper trays, internal tray 2, large capacity tray (LCT), bridge unit, and Booklet Finisher SR3170.
The complete system of Type 5 consists of the main unit, one-pass duplex scanning ADF, lower paper trays, internal tray 2, large capacity tray (LCT), bridge unit, and Booklet Finisher SR3170.

Weight:

(mainly Europe)
- Type 1, 2: Approx. 94 kg (207.3 lb.)
- Type 3, 4 (Models equipped with the ARDF): Approx. 95 kg (209.5 lb.)
- Type 3, 4 (Models equipped with the one-pass duplex scanning ADF): Approx. 100 kg (220.5 lb.)
- Type 5: Approx. 101 kg (222.7 lb.)
(mainly Asia)
- Type 1, 2: Approx. 94 kg (207.3 lb.)
- Type 3, 4: Approx. 86 kg (189.6 lb.)
- Type 5: Approx. 101 kg (222.7 lb.)
(mainly North America)
- Type 1, 2: Approx. 94 kg (207.3 lb.)
- Type 3, 4: Approx. 100 kg (220.5 lb.)
- Type 5: Approx. 101 kg (222.7 lb.)