Skip header
 

Erasing Colors

Copies by erasing a certain color in the image of the original.

This function can be used when [Full Color] or [Black & White] is selected in the color mode.

Illustration of Erase Color

1Select a color mode.

Operation panel screen illustration

2Press [Edit / Color].

3Press [Color].

4Press [Erase Color].

5Select the color to be erased.

Operation panel screen illustration

Up to four colors can be erased at the same time.

6Press [OK] twice.

7Place the originals, and then press the [Start] key.

Note

  • To cancel the selection, press the selected (highlighted) key.

  • When [Full Color] is selected, the full color counter values will increase.

  • The width of the color to be erased can be adjusted in five levels. When the width of the color is set to [Wider] under [Color Sensitivity] in User Tools and red has been specified, colors close to orange and purple will be erased. You can change the setting. For details, see Adjust Color Image.