This section describes the user tools in the Tray Paper Settings menu under System Settings.
If the specified paper size differs from the actual size of the paper loaded in the paper tray, a misfeed might occur because the correct paper size was not detected.
Paper Tray Priority: Copier (copier/Document Server)
Specify the tray to supply paper for output.
Default: [Tray 1]
Paper Tray Priority: Facsimile (facsimile)
Specify the tray to supply paper for output.
Default: [Tray 1]
Paper Tray Priority: Printer (printer)
Specify the tray to supply paper for output.
Default: [Tray 1]
Tray Paper Size: Tray 2 - 3
Select the size of the paper loaded in the paper tray.
The paper sizes you can set for tray 2 - 3 are as follows:
[Auto Detect]
A3, A4
, A4
, A5
, A5
, B4 JIS
, B5 JIS
,
B5 JIS, SRA3
, SRA4
, SRA4
, C5 Env
, C5 Env
,
13 × 191/5, 13 × 19
, 13 × 18
,
123/5 × 191/5, 123/5 × 181/2
, 12 × 18
, 11 × 17
,
11 × 15, 11 × 14
, 10 × 15
, 10 × 14
,
81/2 × 14, 81/2 × 13
, 81/2 × 11
, 81/2 × 11
, 81/4 × 14
, 81/4 × 13
, 8 × 13
,
71/4 × 101/2, 71/4 × 101/2
, 51/2 × 81/2
, 51/2 × 81/2
, 8K
, 16K
, 16K
[Custom Size]
Default: [Auto Detect]
You can specify a custom size of between 139.7 - 330.2 mm (5.50 - 13.00 inch) vertically, and between 139.7 - 487.7 mm (5.50 - 19.20 inch) horizontally.
For details about auto detectable paper sizes, see "Recommended Paper Sizes and Types", Paper Specifications and Adding Paper.
Printer Bypass Paper Size
Specify the size of the paper loaded in the bypass tray when printing data from the computer.
The paper sizes you can set for the bypass tray are as follows:
[Auto Detect]
A3, A4
, A4
, A5
, A5
, A6
, B4 JIS
, B5 JIS
,
B5 JIS, B6 JIS
, SRA3
, SRA4
, SRA4
, C5 Env
, C5 Env
,
C6 Env, DL Env
, DL Env
, 13 × 191/5
, 13 × 19
, 13 × 18
,
123/5 × 191/5, 123/5 × 181/2
, 12 × 18
, 11 × 17
,
11 × 15, 11 × 14
, 10 × 15
, 10 × 14
,
81/2 × 14, 81/2 × 13
, 81/2 × 11
, 81/2 × 11
, 81/4 × 14
, 81/4 × 13
, 8 × 13
,
71/4 × 101/2, 71/4 × 101/2
, 51/2 × 81/2
, 51/2 × 81/2
,
41/8 × 91/2, 41/8 × 91/2
, 37/8 × 71/2
, 37/8 × 71/2
[Custom Size]
Default: [Auto Detect]
If Finisher SR4110 is installed, the following paper sizes cannot be selected:
C6 Env, DL Env
, DL Env
, 41/8 × 91/2
, 41/8 × 91/2
If Finisher SR4110, folding unit, or multi-hole punch unit is installed, you cannot specify a custom size of 90 – 100 mm or less vertically.
You can specify a custom size of between 90.0 - 330.2 mm (3.55 - 13.00 inch) vertically, and between 139.7 - 487.7 mm (5.50 - 19.20 inch) horizontally.
To allow users to specify a horizontal dimension of 487.7 - 1260 mm in "Custom Size", other settings must first be specified. For details about specifying custom paper sizes, contact your sales or service representative.
For details about auto detectable paper sizes, see "Recommended Paper Sizes and Types", Paper Specifications and Adding Paper.
Tray Paper Size: Interposer Upper Tray, Lower Tray (when the twin interposer is installed.)
Specify the size of the paper loaded in the twin interposer when printing data from the computer.
The paper sizes you can set for the twin interposer are as follows:
[Auto Detect]
A3, A4
, A4
, A5
, A5
, B4 JIS
, B5 JIS
,
B5 JIS, SRA3
, SRA4
, SRA4
, 13 × 191/5
, 13 × 19
,
13 × 18, 123/5 × 191/5
, 123/5 × 181/2
, 12 × 18
, 11 × 17
,
11 × 15, 11 × 14
, 10 × 15
, 10 × 14
,
81/2 × 14, 81/2 × 13
, 81/2 × 11
, 81/2 × 11
, 81/4 × 14
,
81/4 × 13, 8 × 13
, 71/4 × 101/2
, 71/4 × 101/2
, 51/2 × 81/2
,
51/2 × 81/2, 8K
, 16K
, 16K
[Custom Size]
Default: [Auto Detect]
You can specify a custom size of between 139.7 - 330.2 mm (5.50 - 13.00 inch) vertically, and between 139.7 - 487.7 mm (5.50 - 19.20 inch) horizontally.
For details about auto detectable paper sizes, see "Recommended Paper Sizes and Types", Paper Specifications and Adding Paper.
Tray Paper Size: LCT (when the wide LCT is installed.)
Specify the size of the paper loaded in the wide LCT when printing data from the computer.
The paper sizes you can set for the wide LCT are as follows:
[Auto Detect]
A3, A4
, A4
, A5
, A5
, A6
, B4 JIS
, B5 JIS
,
B5 JIS, B6 JIS
, SRA3
, SRA4
, SRA4
, C5 Env
, C5 Env
,
C6 Env, DL Env
, 13 × 191/5
, 13 × 19
, 13 × 18
,
123/5 × 191/5, 123/5 × 181/2
, 12 × 18
, 11 × 17
,
11 × 15, 11 × 14
, 10 × 15
, 10 × 14
,
81/2 × 14, 81/2 × 13
, 81/2 × 11
, 81/2 × 11
, 81/4 × 14
, 81/4 × 13
, 8 × 13
,
71/4 × 101/2, 71/4 × 101/2
, 51/2 × 81/2
, 51/2 × 81/2
,
41/8 × 91/2, 8K
, 16K
, 16K
[Custom Size]
Default: [Auto Detect]
If you use paper size of A6, B6
, 41/8 × 91/2
, C6
, or DL Env
, the fence for postcard is necessary.
If you specify a custom size of between 100 and 139.2 mm vertically, the fence for postcard is necessary.
If Finisher SR4110 is installed, the following paper sizes cannot be selected:
C6 Env, DL Env
, 41/8 × 91/2
You can specify a custom size of between 100.0 - 330.2 mm (3.94 - 13.00 inch) vertically, and between 139.7 - 487.7 mm (5.50 - 19.20 inch) horizontally.
For details about auto detectable paper sizes, see "Recommended Paper Sizes and Types", Paper Specifications and Adding Paper.
Paper Type: Bypass Tray
Set the display so you can see what type of paper is loaded in the bypass tray.
The paper types you can set for the bypass tray are as follows:
[Do not Display], [Recycled Paper], [Color Paper], [Letterhead], [Label Paper], [Translucent Paper], [Preprinted Paper], [Bond Paper], [Cardstock], [Prepunched Paper], [OHP (Transparency)], [Special Paper 1], [Special Paper 2], [Special Paper 3], [Envelope], [Coated Paper], [Coated Paper: Gloss], [Tab Stock],
The paper thicknesses you can set for the bypass tray are as follows:
[Thin Paper] (52.3 - 65.9 g/m2, 14.0 – 17.9 lb. Bond)
[Plain Paper 1] (66 - 80.9 g/m2, 18.0 – 21.9 lb. Bond)
[Plain Paper 2] (81 - 100.9 g/m2, 22.0 – 27.0 lb. Bond)
[Middle Thick] (101 - 127.4 g/m2, 27.1 lb. Bond – 46.9 lb. Cover)
[Thick Paper 1] (127.5 - 150 g/m2, 47.0 – 55.0 lb. Cover)
[Thick Paper 2] (150.1 - 216 g/m2, 55.1 – 79.9 lb. Cover)
[Thick Paper 3] (216.1 - 256 g/m2, 80.0 lb. Cover – 141.0 lb. Index)
[Thick Paper 4] (256.1 - 300 g/m2, 141.1 – 165.0 lb. Index)
Default for "Paper Type": [Do not Display]
Default for "Paper Thickness": [Plain Paper 1]
Default for "Apply Duplex": [Yes]
Default for "Apply Auto Paper Select": [Yes]
If [Translucent Paper] is selected for "Paper Type", only [Thin Paper] is available.
If [Envelope] is selected for "Paper Type", [Thin Paper], [Plain Paper 1], [Plain Paper 2], [Middle Thick] and [Thick Paper 1] are not displayed.
If [Coated Paper] is selected for "Paper Type", [Thin Paper] is not displayed.
If [OHP (Transparency)] or [Coated Paper: Gloss] is selected for "Paper Type", "Paper Thickness" is not available.
If you select [Coated Paper], load a paper with the paper thickness of 73.3 g/m2 or more.
The key mark is displayed next to the paper tray if [No] is selected in "Apply Auto Paper Select".
Under the copier function, "Apply Auto Paper Select" is only available when [Do not Display] or [Recycled Paper] is selected as a paper type. "Apply Auto Paper Select" is unavailable when this setting or "Apply Duplex" is set to [No] or when [Custom Size] is selected as a paper size.
For details about the relations between possible paper sizes and thickness, see "Recommended Paper Sizes and Types", Paper Specifications and Adding Paper.
For details about the recommended conditions for using thick paper, see "Thick Paper", Paper Specifications and Adding Paper.
Paper Type: Tray 1
Set the display so you can see what type of paper is loaded in the tray 1.
The print function uses this information to automatically select the paper tray.
The paper types you can set for the tray 1 are as follows:
[Do not Display], [Recycled Paper], [Color Paper], [Letterhead], [Preprinted Paper], [Bond Paper], [Cardstock], [Prepunched Paper], [Special Paper 1], [Special Paper 2], [Special Paper 3], [Coated Paper: Gloss]
The paper thicknesses you can set for the tray 1 are as follows:
[Thin Paper] (52.3 - 65.9 g/m2, 14.0 – 17.9 lb. Bond)
[Plain Paper 1] (66 - 80.9 g/m2, 18.0 – 21.9 lb. Bond)
[Plain Paper 2] (81 - 100.9 g/m2, 22.0 – 27.0 lb. Bond)
[Middle Thick] (101 - 127.4 g/m2, 27.1 lb. Bond – 46.9 lb. Cover)
[Thick Paper 1] (127.5 - 150 g/m2, 47.0 – 55.0 lb. Cover)
[Thick Paper 2] (150.1 - 216 g/m2, 55.1 – 79.9 lb. Cover)
[Thick Paper 3] (216.1 - 256 g/m2, 80.0 lb. Cover – 141.0 lb. Index)
Default for "Paper Type": [Do not Display]
Default for "Paper Thickness": [Plain Paper 1]
Default for "Apply Duplex": [Yes]
Default for "Apply Auto Paper Select": [Yes]
If [Coated Paper: Gloss] is selected for "Paper Type", "Paper Thickness" is not available.
Under the copier function, "Apply Auto Paper Select" is only available when [Do not Display] or [Recycled Paper] is selected as a paper type. "Apply Auto Paper Select" is unavailable when this setting or "Apply Duplex" is set to [No].
For details about the relations between possible paper sizes and thickness, see "Recommended Paper Sizes and Types", Paper Specifications and Adding Paper.
For details about the recommended conditions for using thick paper, see "Thick Paper", Paper Specifications and Adding Paper.
Paper Type: Tray 2 - 3
Set the display so you can see what type of paper is loaded in the tray 2-3.
The print function uses this information to automatically select the paper tray.
The paper types you can set for the tray 2-3 are as follows:
[Do not Display], [Recycled Paper], [Color Paper], [Letterhead], [Preprinted Paper], [Bond Paper], [Cardstock], [Prepunched Paper], [Special Paper 1], [Special Paper 2], [Special Paper 3], [Envelope], [Coated Paper: Gloss], [Tab Stock]
The paper thicknesses you can set for the tray 2-3 are as follows:
[Thin Paper] (52.3 - 65.9 g/m2, 14.0 – 17.9 lb. Bond)
[Plain Paper 1] (66 - 80.9 g/m2, 18.0 – 21.9 lb. Bond)
[Plain Paper 2] (81 - 100.9 g/m2, 22.0 – 27.0 lb. Bond)
[Middle Thick] (101 - 127.4 g/m2, 27.1 lb. Bond – 46.9 lb. Cover)
[Thick Paper 1] (127.5 - 150 g/m2, 47.0 – 55.0 lb. Cover)
[Thick Paper 2] (150.1 - 216 g/m2, 55.1 – 79.9 lb. Cover)
[Thick Paper 3] (216.1 - 256 g/m2, 80.0 lb. Cover – 141.0 lb. Index)
Default for "Paper Type": [Do not Display]
Default for "Paper Thickness": [Plain Paper 1]
Default for "Apply Duplex": [Yes]
Default for "Apply Auto Paper Select": [Yes]
If [Envelope] is selected for "Paper Type", [Thin Paper], [Plain Paper 1], [Plain Paper 2], [Middle Thick] and [Thick Paper 1] are not displayed.
If [Coated Paper: Gloss] is selected for "Paper Type", "Paper Thickness" is not available.
The key mark is displayed next to the paper tray if [No] is selected in "Apply Auto Paper Select".
Under the copier function, "Apply Auto Paper Select" is only available when [Do not Display] or [Recycled Paper] is selected as a paper type. "Apply Auto Paper Select" is unavailable when this setting or "Apply Duplex" is set to [No] or when [Custom Size] is selected as a paper size.
For details about the relations between possible paper sizes and thickness, see "Recommended Paper Sizes and Types", Paper Specifications and Adding Paper.
For details about the recommended conditions for using thick paper, see "Thick Paper", Paper Specifications and Adding Paper.
Paper Type: LCT (when the LCT is installed.)
Set the display so you can see what type of paper is loaded in the LCT.
The print function uses this information to automatically select the paper tray.
The paper types you can set for the LCT are as follows:
[Do not Display], [Recycled Paper], [Color Paper], [Special Paper 1], [Special Paper 2], [Special Paper 3], [Letterhead], [Preprinted Paper], [Prepunched Paper], [Bond Paper], [Cardstock], [Coated Paper: Gloss]
The paper thicknesses you can set for the LCT are as follows:
[Thin Paper] (52.3 - 65.9 g/m2, 14.0 – 17.9 lb. Bond)
[Plain Paper 1] (66 - 80.9 g/m2, 18.0 – 21.9 lb. Bond)
[Plain Paper 2] (81 - 100.9 g/m2, 22.0 – 27.0 lb. Bond)
[Middle Thick] (101 - 127.4 g/m2, 27.1 lb. Bond – 46.9 lb. Cover)
[Thick Paper 1] (127.5 - 150 g/m2, 47.0 – 55.0 lb. Cover)
[Thick Paper 2] (150.1 - 216 g/m2, 55.1 – 79.9 lb. Cover)
Default for "Paper Type": [Do not Display]
Default for "Paper Thickness": [Plain Paper 1]
Default for "Apply Duplex": [Yes]
If [Coated Paper: Gloss] is selected for "Paper Type", "Paper Thickness" is not available.
For details about the relations between possible paper sizes and thickness, see "Recommended Paper Sizes and Types", Paper Specifications and Adding Paper.
For details about the recommended conditions for using thick paper, see "Thick Paper", Paper Specifications and Adding Paper.
Paper Type: LCT (when the wide LCT is installed.)
Set the display so you can see what type of paper is loaded in the wide LCT.
The paper types you can set for the wide LCT are as follows:
[Do not Display], [Recycled Paper], [Color Paper], [Special Paper 1], [Special Paper 2], [Special Paper 3], [Letterhead], [Preprinted Paper], [Prepunched Paper], [Bond Paper], [Cardstock], [OHP (Transparency)], [Tab Stock], [Translucent Paper], [Label Paper], [Coated Paper: Gloss], [Envelope], [Coated Paper]
The paper thicknesses you can set for the wide LCT are as follows:
[Thin Paper] (52.3 - 65.9 g/m2, 14.0 – 17.9 lb. Bond)
[Plain Paper 1] (66 - 80.9 g/m2, 18.0 – 21.9 lb. Bond)
[Plain Paper 2] (81 - 100.9 g/m2, 22.0 – 27.0 lb. Bond)
[Middle Thick] (101 - 127.4 g/m2, 27.1 lb. Bond – 46.9 lb. Cover)
[Thick Paper 1] (127.5 - 150 g/m2, 47.0 – 55.0 lb. Cover)
[Thick Paper 2] (150.1 - 216 g/m2, 55.1 – 79.9 lb. Cover)
[Thick Paper 3] (216.1 - 256 g/m2, 80.0 lb. Cover – 141.0 lb. Index)
[Thick Paper 4] (256.1 - 300 g/m2, 141.1 – 165.0 lb. Index)
Default for "Paper Type": [Do not Display]
Default for "Paper Thickness": [Plain Paper 1]
Default for "Apply Duplex": [Yes]
Default for "Apply Auto Paper Select": [Yes]
If [Translucent Paper] is selected for "Paper Type", only [Thin Paper] is available.
If [Envelope] is selected for "Paper Type", [Thin Paper], [Plain Paper 1], [Plain Paper 2], [Middle Thick] and [Thick Paper 1] are not displayed.
If [Coated Paper] is selected for "Paper Type", [Thin Paper] is not displayed.
If [OHP (Transparency)] or [Coated Paper: Gloss] is selected for "Paper Type", "Paper Thickness" is not available.
If you select [Coated Paper], use a paper with the paper thickness of 73.3 g/m2 or more.
The key mark is displayed next to the paper tray if [No] is selected in "Apply Auto Paper Select".
Under the copier function, "Apply Auto Paper Select" is only available when [Do not Display] or [Recycled Paper] is selected as a paper type. "Apply Auto Paper Select" is unavailable when this setting or "Apply Duplex" is set to [No] or when [Custom Size] is selected as a paper size.
For details about the relations between possible paper sizes and thickness, see "Recommended Paper Sizes and Types", Paper Specifications and Adding Paper.
For details about the recommended conditions for using thick paper, see "Thick Paper", Paper Specifications and Adding Paper.
Front Cover Sheet Tray
You can specify and display the paper tray that is used for setting front cover sheets.
After selecting the paper tray, you can also specify the display timing and copy method for two-sided copying.
Default: [Off]
If you set this setting to [On], take note of the following:
When [At Mode Selected] is selected in "Display Time", front cover sheet tray settings only appear when the cover function or slip sheet function is selected. When [Full Time] is selected, the front cover sheet tray is always displayed.
Back Cover Sheet Tray
Specify which paper tray you want to load the back covers from, and make sure confirmation of your setting is displayed. When you have selected the tray, specify the confirmation timing and the copy method for two-sided copying.
Default: [Off]
When [At Mode Selected] is selected, back cover sheet tray settings only appear when the cover function or slip sheet function is selected.
When [Full Time] is selected, the back cover sheet tray is always displayed.
Slip Sheet Tray
You can specify and display the paper tray that is used for setting slip sheets.
You can also specify the display timing and copy method for two-sided copying.
Default: [Off]
If you set this setting to [On], take note of the following:
When [At Mode Selected] is selected in "Display Time", slip sheet tray settings only appear when the cover function or slip sheet function is selected. When [Full Time] is selected, the slip sheet tray is always displayed.
Separation Sheet Tray
You can specify and display the paper tray that is used for setting separation sheets.
You can also specify the display timing.
Default: [Off]
If you set this setting to [On], take note of the following:
When [At Mode Selected] is selected in "Display Time", separation sheet tray settings only appear when the separation sheet function is selected. When [Full Time] is selected, the separation sheet tray is always displayed.
Designation Sheet 1 Tray, Designation Sheet 2 Tray, Designation Sheet 3 Tray, Designation Sheet 4 Tray, Designation Sheet 5 Tray, Designation Sheet 6 Tray, Designation Sheet 7 Tray
Specify which paper tray you want to load the chapter division sheets from, and make sure confirmation of your setting is displayed. When you have selected the tray, specify the confirmation timing and the copy method for two-sided copying.
Default: [Off]
When [At Mode Selected] is selected, designation sheet 1 tray, designation sheet 2 tray, designation sheet 3 tray, designation sheet 4 tray, designation sheet 5 tray, designation sheet 6 tray, or designation sheet 7 tray settings only appear when the cover function, slip sheet function or designation sheet tray is selected.
When [Full Time] is selected, the designation sheet 1 tray, designation sheet 2 tray, designation sheet 3 tray, designation sheet 4 tray, designation sheet 5 tray, designation sheet 6 tray, or designation sheet 7 tray is always displayed.
Double Feed Detect
Set whether to detect the double feed for each tray.
Default: [On]
The paper guide for the LCT is fixed for A4, 81/2 × 11 size paper. Contact your service representative if you need to change the paper size.
Functions using the front cover sheet tray setting are the front cover function and front/back cover function.
The function for using Designation sheet 1 tray, Designation sheet 2 tray, Designation sheet 3 tray, Designation sheet 4 tray, Designation sheet 5 tray, Designation sheet 6 tray, or Designation sheet 7 tray is designate.