Skip header
 

Letter Fold-out

Applies two folds to create three equal panels (the first panel folding inward, the last panel folding outward).

Illustration of Letter Fold-out

1Press [Finishing].

Operation panel screen illustration

2Press [Folding Unit].

3Press [Letter Fold-out].

4Press [Change].

5Select the items you need from those displayed on the screen.

Operation panel screen illustration

6Press [OK] twice.

7Place the originals, and then press the [Start] key.

Note

  • Folded copies are delivered to the multi-folding unit only.

  • The following copier functions are not available when the Letter Fold-out function is enabled:

    • Punch

    • Staple

  • The Multi-sheet Fold function can fold a maximum of three sheets at a time.

  • When you enable the Multi-sheet Fold function (by setting it to [On]), the Sort function is automatically applied also.

  • The Mixed Sizes function is not available while the Multi-sheet Fold function is enabled.

  • Wrinkling can occur when applying letter fold-out to B4 JISLandscape, 81/2 × 14Landscape, or larger sheets. In some cases, you may have to use A4Landscape sheets or smaller when applying folds in combination with the reduction function.

  • If the Booklet or Magazine function is selected, the settings for those functions have priority.

PreviousNext