Use the bypass tray to copy onto OHP transparencies, adhesive labels, translucent paper, and paper that cannot be loaded in the paper trays.
About how to load paper in the bypass tray, see Paper Specifications and Adding Paper for details.
If the paper type you want to copy onto is not shown on the [Paper Type] screen or its paper weight is between 81.0-127.4 g/m2 (22.0 lb. Bond–46.9 lb. Cover), you must specify the paper type under [Tray Paper Settings] in User Tools. For details about [Tray Paper Settings], see "Tray Paper Settings", Connecting the Machine/ System Settings.
Bypass Tray Usage
Press [Bypass Tray Usage] on the [Bypass Tray Paper] screen to display an explanation about the originals and paper orientation.
Load the paper face up in the bypass tray.
The bypass tray () is automatically selected.
Press the [] key.
Press [Paper Size].
Specify the size of the paper, and then press [OK].
Press [Paper Type].
Specify the type of the paper as necessary, and then press [OK] twice.
Place the originals, and then press the [Start] key.
When the copy job is finished, press the [Reset] key to clear the settings.
If you specify [Display Automatically] for [Paper Settings Screen for Bypass], you can display the [Bypass Tray Paper] screen by pressing [] instead of pressing the [] key. For details, see General Features.
If the bypass tray is not automatically selected, press [].
When copying onto special paper such as adhesive labels, always select [Face Up] under [Copy Eject Face Method in Bypass Mode] of User Tools. If you select [Face Down], a paper misfeed may occur. For details, see Input / Output.
If you place originals on the exposure glass and want the copies to be delivered face down, select [Face Down] for both [Copy Eject Face Method in Glass Mode] and [Copy Eject Face Method in Bypass Mode] of User Tools. For details, see Input / Output.