Skip header
 

Notes on configuring the Half Fold function

If [Half Fold: Multi-sheet fold (Finisher Booklet Tray)] is specified and the number of sheets specified to be folded exceeds the maximum folding number, the machine first folds the maximum number of sheets that can be folded together, and then it folds the remaining sheets. Up to five sheets can be folded at a time.

Conditions to reset a job combined with the half fold function

A job is reset if:

  • [Auto Continue] is specified.

  • The bypass tray is specified as the source tray.

  • [Driver / Command] is selected in [Tray Setting Priority] for the specified source tray.

  • Slip Sheets is specified.

  • Separation Sheets is specified.

  • The staple function is specified.

  • The punch function is specified.

  • The machine is printing a report.

  • The half fold function cannot be used for the selected paper size or type.

  • [Half Fold: Multi-sheet fold (Finisher Booklet Tray)] is specified but the paper sizes are different.

  • Booklet Finisher is malfunctioning.

  • [Half Fold: Multi-sheet fold (Finisher Booklet Tray)] is specified but the number of sheets exceeds the maximum folding number.

  • Booklet Finisher is not attached.

Note

  • If the information icon (Icon illustration) is displayed next to the "Fold:" list, you cannot specify Half Fold function. Click the information icon (Icon illustration) to check why Half Fold function is unavailable.

  • When the Half Fold function is used, Collate will be canceled.

  • If you cannot make Half Fold function settings even with a Booklet Finisher installed, options may not be set correctly in the printer driver. To correct the printer driver's option settings, see "Configuring Option Settings for the Printer", Driver Installation Guide.