Skip header
 

Specifying thick paper, thin paper, or OHP transparencies for paper type using the control panel

Important

  • Use A4PortraitLandscape or 81/2 × 11PortraitLandscape size OHP transparencies, and specify their size.

  • Usually only one side of OHP transparencies can be used for printing. Be sure to load them with the print side down.

  • When printing onto OHP transparencies, remove printed sheets one by one.

1Press the [User Tools/Counter] key.

User Tools/Counter key illustration

2Press [Tray Paper Settings].

3Press [Printer Bypass Paper Size], and then specify the paper size.

4Press [OK].

5Press [Down arrow keyNext].

6Press [Paper Type: Bypass Tray].

7Select the proper items, according to the paper type you want to specify.

  • Press [OHP (Transparency)] on the [Paper Type] area when loading OHP transparencies.

  • To load thin or thick paper, press [Do not Display] on the [Paper Type] area, and then select the appropriate paper thickness in the [Paper Thickness] area.

    Operation panel screen illustration

8Press [OK].

9Press the [User Tools/Counter] key.

Note

  • We recommend that you use specified OHP transparencies.

  • For details about paper thickness, see "Tray Paper Settings", Connecting the Machine/ System Settings.

PreviousNext