Previous
This section describes the user tools in the Edit menu under [Copier / Document Server Features].
Enter the width of the binding margin with the number keys as follows:
(mainly Europe and Asia)0–30 mm (in increments of 1 mm)
(mainly North America)0.0–1.2 inches (in increments of 0.1 inches)
Enter the width of the erased margin with the number keys as follows:
- (mainly Europe and Asia)
2–99 mm (in increments of 1 mm)
- (mainly North America)
0.1–3.9 inches (in increments of 0.1 inches)
Front Margin: Left / Right
Specify left and right margins on the front side of copies in Margin Adjustment mode.
Default:
(mainly Europe and Asia)
[Left: 5 mm]
(mainly North America)
[Left: 0.2 inch]
Back Margin: Left / Right
Specify left and right margins on the back side of copies in Margin Adjustment mode.
Default:
(mainly Europe and Asia)
[Right: 5 mm]
(mainly North America)
[Right: 0.2 inch]
Front Margin: Top / Bottom
Specify top and bottom margins on the front side of copies in Margin Adjustment mode.
Default:
(mainly Europe and Asia)
[Top: 0 mm]
(mainly North America)
[Top: 0.0 inch]
Back Margin: Top / Bottom
Specify top and bottom margins on the back side of copies in Margin Adjustment mode.
Default:
(mainly Europe and Asia)
[Top: 0 mm]
(mainly North America)
[Top: 0.0 inch]
1 Sided 
2 Sided Auto Margin: TtoT
In 1 Sided 2 Sided mode, you can specify the margins on the back side.
Default:
(mainly Europe and Asia)
[Right: 5 mm]
(mainly North America)
[Right: 0.2 inch]
1 Sided 2 Sided Auto Margin: TtoB
In 1 Sided 2 Sided mode, you can specify the margins on the back side.
Default:
(mainly Europe and Asia)
[Top: 0 mm]
(mainly North America)
[Top: 0.0 inch]
Erase Border Width
Specify the width for erasing border.
Default:
(mainly Europe and Asia)
[10 mm]
(mainly North America)
[0.4 inch]
Erase Original Shadow in Combine
In Combine mode, you can specify whether to erase a 3 mm, 0.1 inches boundary margin around all four edges of each original.
Default: [On]
Erase Center Width
Specify the width of the erased center margins with this function.
Default:
(mainly Europe and Asia)
[10 mm]
(mainly North America)
[0.4 inch]
Front Cover Copy in Combine
You can make a combined copy on the front cover sheet when you select Front Cover mode.
Combine
Do not Combine
Default: [Combine]
Copy Order in Combine
You can select the copy order in Combine mode from [From Left to Right] or [From Top to Bottom].
From Left to Right
From Top to Bottom
Default: [From Left to Right]
Orientation: Booklet, Magazine
Select the opening orientation of copies made using Booklet or Magazine mode.
Default: [Open to Left]
Copy on Designating Page in Combine
Specify whether to make a combined copy on the inserted slip sheets in Designate / Chapter mode.
Default: [Combine]
Image Repeat Separation Line
You can select a separation line using the Image Repeat function from: [None], [Solid], [Broken A], [Broken B], or [Crop Marks].
Default for [Type of Separation Line]: [None]
In full color, you can also select the color of the separation line.
Default for [Color of Separation Line in Full Color]: [Black]
Separation line color cannot be specified when selecting [None].
In black and white, printing will be done in black.
Selecting solid or broken lines might produce a blank area of approximately 1.5 mm (0.06 inches) in width along the separation line.
Double Copies Separation Line
You can select a separation line using the Double Copies function from: [None], [Solid], [Broken A], [Broken B], or [Crop Marks].
Default for [Type of Separation Line]: [None]
In full color, you can also select the color of the separation line.
Default for [Color of Separation Line in Full Color]: [Black]
Separation line color cannot be specified when selecting [None].
In black and white, printing will be done in black.
Selecting solid or broken lines might produce a blank area of approximately 1.5 mm (0.06 inches) in width along the separation line.
Separation Line in Combine
You can select a separation line using the Combine function from: [None], [Solid], [Broken A], [Broken B], or [Crop Marks].
Default for [Type of Separation Line]: [None]
In full color, you can also select the color of the separation line.
Default for [Color of Separation Line in Full Color]: [Black]
Separation line color cannot be specified when selecting [None].
In black and white, printing will be done in black.
Selecting solid or broken lines might produce a blank area of approximately 1.5 mm (0.06 inches) in width along the separation line.
For details about how to change the Copier / Document Server Features, see "Changing Default Settings", Connecting the Machine/ System Settings.
