Top Page > Remarks > Where to Put Your Machine > Power Connection

Power Connection

This section explains the power supply.

Do not use extension cords. Doing so could result in fire or electric shock.

Do not use any power sources other than those that match the specifications shown in this manual. Doing so could result in fire or electric shock.

Do not use power cords that are damaged, broken, or modified. Also, do not use power cords that have been trapped under heavy objects, pulled hard, or bent severely. Doing so could result in fire or electric shock.

Unplug the power cord from the wall outlet before you move the machine. While moving the machine, take care that the power cord is not damaged under the machine. Failing to take these precautions could result in fire or electric shock.

When disconnecting the power cord from the wall outlet, always pull the plug, not the cord. Pulling the cord can damage the power cord. Use of damaged power cords could result in fire or electric shock.

Power Source
(mainly Europe)
220 – 240 V, 1.4 A or more, 50/60 Hz
(mainly North America)
120 V, 2.5 A or more, 60 Hz
Please be sure to connect the power cord to a power source as above.
Voltage tolerance
- Voltage must not fluctuate more than 10%.
The socket-outlet shall be installed near the machine and shall be easily accessible.