Skip header
 

Top Page > Remarks > Where to Put Your Machine > Machine Environment > Moving

Moving

CAUTION

  • Contact your service representative if you need to lift the machine (such as when relocating it to another floor). Do not attempt to lift the machine without the assistance of your service representative. The machine will be damaged if it topples or is dropped, resulting in malfunction and risk of injury to users. The machine's various handling areas are for service engineer use only. Do not touch these areas.

CAUTION

  • Unplug the power cord from the wall outlet before you move the machine. While moving the machine, take care that the power cord is not damaged under the machine. Failing to take these precautions could result in fire or electric shock.

Important

  • When moving the machine, the following precautions should always be followed:

    • Turn off the main switch.

    • Unplug the power cord from the wall outlet. When you do, grip the plug to avoid damaging the cord and causing fire or electric shock.

    • Close all covers and trays including the front cover.

Note

  • Carefully move the machine. If you do not, the machine might be damaged or a stored file might be deleted.

  • Avoid any strong shock to the machine. This could damage the hard disk and cause stored files to be deleted. For precautionary reasons, files should be copied to another local computer.