Nozzle Check
Follow the procedure below to check whether the print head nozzles are clogged up or not by printing a nozzle check test pattern.
Press the [
/Menu] key.
Press the [
] or [/Menu] key to display [Maintenance], and then press the [#Enter] key.
| Menu: Maintenance |
Press the [] or [/Menu] key to display [Nozzle Check], and then press the [#Enter] key.
| Maintenance: Nozzle Check |
Press the [#Enter] key.
| Press # to print pattern |
A test pattern is printed.
Press the [Escape] key.
Check the printed test pattern.
Printed Test Pattern
Using the test pattern, check for print head clogging and the number of the clogged head.
The number appearing above each color in the test pattern is the number of the print head.
The print head for cyan and black is [Head 1].
The print head for yellow and magenta is [Head 2].
Check which print head is clogged by referring to the following illustration.
Normal
When print heads are clogged
If the print head is clogged, perform Head Cleaning. See Head-cleaning
.
If the problem persists, perform Head Flushing. See Head-flushing.
