Replacing an Ink Collector Unit

The following explains the warning messages on the plastic bag used in this product's packaging.
- Keep the polythene materials (bags, gloves, etc.) supplied with this machine away from babies and small children at all times. Suffocation can result if polythene materials are brought into contact with the mouth or nose.

When replacing ink collector unit, avoid getting ink on your clothing. If ink comes into contact with your clothing, wash the stained area with cold water. Hot water will set the ink into the fabric and make removing the stain impossible.

If ink gets into contact with eyes, wash eyes immediately with running water. Consult a doctor if necessary.

If ink is ingested, induce vomiting by drinking a strong saline solution. Consult a doctor immediately.

When removing jammed paper or replacing ink, avoid getting ink on your skin. If ink comes into contact with your skin, wash the affected area thoroughly with soap and water.

When removing the ink collector unit, avoid putting your hand near the place where the ink collector unit is installed. If ink comes in contact with your hands, wash them thoroughly with soap and water.

When removing the ink collector unit, do not touch the inside of the machine.
Do not use an ink collector unit that has not been used for a long time.
Do not touch the ink collector unit' chip contacts.
Take care not to drop the ink collector unit.
Take care not to drop the ink collector unit when putting it in the supplied plastic bag. The bag might tear, causing ink to spill.
Make sure the ink collector unit is fully inserted. If it is not, ink will leak inside the machine.

Take the ink collector unit out of the box.