Skip header
 

Top Page > Machine Setup Menus > Using the [Maintenance] Menu > Setting the Date and Time > Date setting

Date setting

1Press the [Down arrow key/Menu] key.

2Press the [Up arrow key] or [Down arrow key/Menu] key to display [Maintenance], and then press the [#Enter] key.

Menu:               
Maintenance         

3Press the [Up arrow key] or [Down arrow key/Menu] key to display [Date/Time], and then press the [#Enter] key.

Maintenance:        
Date/Time           

4Press the [Up arrow key] or [Down arrow key/Menu] key to display [Date Setting], and then press the [#Enter] key.

Date/Time:          
Date Setting        

5Press the [Up arrow key] or [Down arrow key/Menu] key to set the date, and then press the [#Enter] key.

Region A icon(mainly Europe and Asia)

Date Setting:       
30/ 8/2012          

Region B icon(mainly North America)

Date Setting:       
 8/30/2012          

To specify the time right after this step, go to Step 4 in "Time Setting".

See Time setting.

6Press the [Escape] key.