Loading precautions
Load only supported paper in the paper tray.
Load paper with the paper grain parallel to the feed direction.
Do not load paper of different types at the same time.
Before you load paper in the paper tray, remove all of the paper that is currently loaded in the tray.
Pull the Tray 1-3 completely out before loading it with paper.
Do not stack paper over the limit mark.
Curled paper may jam. Straighten any curls within 2 mm (0.08 inches) before loading.
Before loading envelopes, make sure their edges are sharply creased by rubbing the edges with a pen or similar object.
Correct orientation of pre-printed paper when loaded in the Tray 1-3
Load paper print side down, shorter edge pointing in the paper feed direction.
Correct orientation of pre-printed paper when loading it in the bypass tray
Load paper print side up, shorter edge pointing in the paper feed direction.
To print over a portrait image:
Load paper so that its top edge is pointing in the paper feed direction.
To print over a landscape image:
Load paper so that its right edge is pointing in the paper feed direction.
