Using the LPR Port

This section explains how to install the printer driver (TCP/IP) and set up the LPR Port.

Only administrators can perform this installation. Log on as a member of the Administrators group.

Insert the CD-ROM in the CD-ROM drive.

Quit all applications currently running.

Select an interface language, and then click [OK].

Click [PCL/RPCS Raster Printer Drivers] or [Printer Driver].

Read the entire license agreement carefully. If you accept its terms, click [I accept the agreement.], and then click [Next >].

Select the program you want to use, and then click [Next >]. (SG 3110DN/SG 3110DNw)

Select the model of printer you want to use. (SG 3110DN/SG 3110DNw/SG 7100DN)

Click [Connect to a printer port or LAN], and then click [Next >]. (SG 2100N)

To search for printers automatically, select [Search for printers automatically], and then follow the wizard's instructions.
To search for a printer by its IP address, select [Search for printers by specified IP Address], and then follow the wizard's instructions.
If you do not search for a printer, select [Do not search]. In this example procedure, [Do not search] is selected.

Click [+] to display the printer settings.

Click [Port:], and then click [Add].

Click [LPR Port], and then click [OK].

If [LPR Port] does not appear, see Windows Help and install it.

Enter the machine's IP address in the [Name or address of server providing lpd] box.

Enter "lp" in the [Name or address of server providing lpd] box, and then click [OK].

If necessary, configure the default printer.

If necessary, configure the setting for sharing the printer.

Click [Continue].

The printer driver installation starts

If you want to make initial settings for the printer, click [Set Now] or [OK].

Make initial settings, and then click [OK].

Click [Finish].

If a dialog box asking whether you want to restart now appears, select [Yes, restart now.], and then click [Finish].

Although the Windows security warning may appear during installation, ignore it and continue with the installation.
A message appears if there is a newer version of the printer driver already installed. If this is the case, you cannot install the printer driver using Auto Run. See If a Message Appears during Installation .