Connecting the Machine via a Wireless LAN Interface
This section explains how to connect the machine to the network via a wireless LAN.
Ad hoc mode is not supported.
Ethernet and wireless LAN cannot be used at the same time.
To use wireless LAN instead of Ethernet-based LAN, you must first plug the cable for the wireless LAN into the Ethernet board.
The following table shows the settings and their defaults. These items appear in [Wireless LAN] under the [Host Interface] menu. See Using the [Host Interface] Menu
.
Setting Name |
Default |
|---|---|
SSID |
blank |
Security Method |
Not Active |
Easy Setup |
- |
To specify the wireless LAN settings, select either [Easy Setup] or [SSID].
If you select [SSID], specify [Security Method].
