Skip header
 

Top Page > Preparing for Printing > Checking the Supplied Items and Unpacking the Machine

Checking the Supplied Items and Unpacking the Machine

WARNING

  • The following explains the warning messages on the plastic bag used in this product's packaging.

    • Keep the polythene materials (bags, etc.) supplied with this machine away from babies and small children at all times. Suffocation can result if polythene materials are brought into contact with the mouth or nose.

CAUTION

  • SG 7100DN weighs around 15 kg (33 lb).

  • Grip the center area at the base of the machine's sides. Lift it slowly and do not strain your body.

  • When moving the machine, remove the option. Careless handling and over exertion when lifting can result in breakage and/or injury.

Important

  • Do not turn the machine on until you have read how to do so.

    machine body illustration

Open the box and take out all supplied items. Check that all the following items are present:

1Take off the protective covering.

2Remove the plastic bag.

3Lift the machine and move it to the place where you want to install it.

Grip the indented area at the base of the machine's sides, as shown. Lift and carry the machine slowly and carefully.

moving the machine illustration

4Remove the tape from the machine body.

5Attach units and options.

See Attaching and Detaching Units and Options.

Note

  • We recommend you keep the box, so you can use it again when moving the machine.

  • USB and LAN cables are not supplied.