Previous
Configuration:
Desktop
Print process:
LED alley and electro-photographic printing
First print speed:
Full color: 9.8 seconds
B&W: 7.5 seconds
Print speed (Full color / B&W):
32 pages per minute (A4
, 81/2 × 11)
Resolution:
1200 × 1200 dpi
Equivalent to 600 × 2400 dpi
Equivalent to 600 × 1200 dpi
600 × 600 dpi
Paper size:
For details, see Paper Specifications.
Paper weight:
For details, see Paper Specifications.
Paper output capacity:
Standard 200 sheets (80 g/m2, 20 lb. BOND)
Paper input capacity:
Tray |
Paper capacity*1 |
|---|---|
Standard paper feed tray |
250 sheets |
Bypass tray |
100 sheets |
Optional paper feed units |
500 sheets × 3 |
*1 Paper weight: 80 g/m2 (20 lb. BOND)
Power requirements:
(mainly Europe and Asia)220–240 V, 50/60 Hz, 5.5A
(mainly North America)120–127 V, 60 Hz, 11 A
Power consumption (complete system):
- (mainly Europe and Asia)
Maximum: 1300 W
- (mainly North America)
Maximum: 1400 W
The complete system consists of the main unit and the three paper feed units.
The power level when the main switch is turned off and the power cord is plugged into an outlet: 1 W
Warm-up time (23 °C (73.4 °F), rated voltage):
20 seconds
Dimensions:
Width |
Depth |
Height |
|
|---|---|---|---|
Printer only |
481 mm (19.0 inches) |
515 mm (20.3 inches) |
360 mm (14.2 inches) |
There are protrusions of 12 mm (0.5 inches) on the control panel and 20 mm (0.8 inches) on the handles of the standard paper tray.
When the control panel is tilted, the height increases by up to 46 mm (1.9 inches).
When Tray 1 is extended, the depth increases by 108 mm (4.3 inches).
Weight:
Approx. 41 kg (90.4 lb.)
Noise emission:
Sound power level:
Main unit only
Stand-by
28 dB (A)
Printing
63 dB (A)
Complete system
Stand-by
28 dB (A)
Printing
68 dB (A)
Sound pressure level:
Main unit only
Stand-by
17 dB (A)
Printing
51 dB (A)
Complete system
Stand-by
17 dB (A)
Printing
54 dB (A)
Sound power level and sound pressure level are actual values measured in accordance with ISO 7779.
Sound pressure level is measured from the position of the bystander.
The complete system consists of the main unit and the three paper feed units.
Memory:
Standard 512 MB, up to 1 GB (with the optional SDRAM module)
Hard disk:
160 GB (Optional)
Interfaces:
Standard:
Ethernet (10BASE-T/100BASE-TX)
USB 2.0
To use USB 2.0, a USB computer port and cable that support USB 2.0 are required.
USB Host
SD card slot
Optional:
IEEE 802.11a/b/g/n (Wireless LAN)
Parallel (Bidirectional IEEE 1284)
Gigabit Ethernet (1000BASE-T)
Printer Language:
PCL5c/6, PostScript 3, PDF, PictBridge (optional)
Fonts:
PCL 5c/PCL 6:
45 fonts, 13 International fonts
PostScript 3, PDF:
136 fonts
Network:
Topology:The physical or logical layout of the nodes (devices) in a network. (10BASE-T/100BASETX/1000BASE-T)
Protocol: TCP/IP (IPv4, IPv6), IPX/SPX
