Previous
If your wireless access point supports Wi-Fi Protected Setup (WPS), follow the procedure below to setup a secured wireless LAN connection automatically.
Press the [Menu] key, and then select the setting items using the [
] or [
] key.
Select [Host Interface] 
Press [OK]
Select [Network] Press [OK]
Select [LAN Type] Press [OK]
Select [Wireless LAN] Press [OK] Press [Escape]
Select [Wireless LAN] Press [OK]
Select [Wireless LAN Easy Setup] Press [OK]
Select [Push Button Method] or [PIN Code Method] Press [OK]
If you select [Push Button Method], press the WPS button on the wireless LAN access point.
If you select [PIN Code Method], enter the displayed PIN code in the Registrar.
Press [Start]
When Wireless LAN Easy Setup is complete, press [OK].
