Previous
ENERGY STAR® Program Requirements for Imaging Equipment
The ENERGY STAR® Program Requirements for Imaging Equipment encourage energy conservation by promoting energy efficient computers and other office equipment. The program backs the development and dissemination of products that feature energy saving functions. It is an open program in which manufacturers participate voluntarily. Targeted products are computers, monitors, printers, facsimiles, copiers, scanners, and multifunction devices. Energy Star standards and logos are internationally uniform. |
Energy Saver mode (Fusing Unit Off Mode)
If this machine remains idle for a specified period, it automatically reduces its electrical consumption.
The default period the machine waits before entering Energy Saver mode is 10 seconds. This default time can be changed.
Sleep mode
If this machine is already in Energy Saver mode and remains idle for a specified period, it enters Sleep mode to further reduce its electrical consumption.
The default delay time the machine waits before entering Sleep mode is 1 minute. This default time can be changed.
The machine can print jobs from computers while in Sleep mode.
Specification
Reduced electrical consumption in Energy Saver mode |
18.1 W
18.4 W |
Time of switch into Energy Saver mode |
10 seconds |
Time of switch out from Energy Saver mode |
10 seconds |
Reduced electrical consumption in Sleep mode |
1.0 W |
Time of switch into Sleep mode |
1 minutes |
Time of switch out from Sleep mode |
10 seconds |
