Previous
You can scan the entire are of an original by specifying only the width of the original. The length of the original is detected automatically.
When you use this function, you can enter only the width of the original (X1).
This function is useful for scanning an original that is vertically long.
To display the custom size setting screen, on the initial scanner screen, press [Scan Settings] > [Scan Size] > [Custom Size].
Custom size original to be scanned
Scan settings on the custom size setting screen
[Auto Detect]
Press this to have the machine automatically detect the length of the original.
Original Size (X1)
Specify the width of the custom size original.
Enter the width in [X1], and then press the [
] key.
For X1, you can specify a value between 210 mm (8.3 inches) and 914 mm (36 inches). Start Position (X2) is fixed to 0 mm and the same value as that of Original Size (X1) is automatically entered in Scan Area (X3).
When [Custom Size] under [Scan Settings] is set to [Auto Detect], you cannot select [Specify Size] under [Reduce / Enlarge].
