Previous
You can specify printing options by using the printing option specification command. For RTIFF, specify the printing option specification command immediately before or after a TIFF or CALS file in the following format:
In order to specify this command, you must switch the Printer Language of the machine to RTIFF.
Format in ESC sequence:
ESC DC2 ? z {, option { = value}} {, option { = value}} ... {, option { = value}} ESC SP
Format in hexadecimal code:
1B 12 3F 7A {2C option {3D value}} {2C option {3D value}} ... {2C option {3D value}} 1B 20
Parameter |
Value |
Description |
|---|---|---|
option |
Text string for a printing option name or its acronym |
Specifies the printing option |
option |
Text string for a printing option name or its acronym |
Specifies the printing option. The value “filetype” is invalid |
option |
If string is omitted. |
Ignores the value that corresponds to this parameter |
If you specify an unsupported value, the value corresponding to this parameter is ignored.
You can sequentially specify the number of pairs for this parameter and its corresponding value. However, if the entered command contains more than one pair specifying the same parameter and value, only the last specified pair is applied.
Parameter |
Value |
Description |
|---|---|---|
value |
Text string of the value specified for a printing option |
Specifies the printing option |
If you specify an unsupported value, the option corresponding to this parameter is ignored.
If you specify a printing option name or acronym that does not specify a value, this parameter is omitted.
The maximum length of characters that can be entered is 1,023 bytes.
The entered command remains in effect, until:
The Printer Language is switched.
A new printing option specification command is received.
All printing option specification commands are ignored, if even one printing option is specified.
For details about printing options, see Specifying Printing Options
.
