X. Synchro Cut

• Off

• On

Default: On

• A custom size print image is not printed at the minimum size if "Off" is specified.

• A custom size print image is printed at the minimum size if "On" is specified.

• Whether or not a print image is a regular or custom size image is checked. If it is a custom size image, the custom size paper input location that matches the width of the image is selected, and the image is printed with its vertical length matching the cut length of the custom size paper input location.

• If values for the vertical and horizontal sizes of custom size paper are changed to meet the print image size, the values will not be reflected in "Custom Size: Paper Input Location 1" and "Custom Size: Paper Input Location 2" of "Printer Features: System(EM)".

• If values for the vertical and horizontal sizes of custom size paper, are changed to meet the print image size, the values will be displayed as "Custom Size" in the system configuration field of the Print Settings List (RTIFF).

• When an image is rotated and if the entire area of the rotated image is not within a range of ±10 mm of the size of regular size paper, the image is treated as a custom size image.

• In the size of a regular print image is checked , no tolerance range is considered.

• To find a custom size paper input location, checking the size of a print image refers to a tolerance range.

• If "Off" is specified for "U. Auto Paper Select" and the printing option "autopaper" is not specified, the configuration for this item is disabled.

• If either the "tray" or "paper" printing options is specified and the "autopaper" printing option is not specified, the configuration for this item is disabled.

• If "freecut" or "nofreecut" is specified by a printing option "autopaper" or if a printing option "freesize" is specified, the configuration for this item is disabled.

• If it turns out that a print image is a regular size image or if a printable paper input location is not available, the configuration for this item is disabled.

• A paper input location will be identified as follows:

  1. The size of a print image size is identified.

  2. In a custom size image is printed, a paper input location for the image will be identified from short-width custom size paper input locations.

     • If the long edge of an image matches the width of a custom size paper input location, the image is printed on the paper from this paper input location.

     • If the short edge of an image matches the width of a custom size paper input location, the image is printed on the paper from this paper input location.

  3. If no custom size paper input location is identified for an image you want to print, the configuration for this item is disabled. If this is the case, the paper input location setting will be the same as that specified by "U. Auto Paper Select".

  4. If an image is printed on the paper from a custom size paper input location, the size of the custom size paper input location is not specified in the "Custom Size: Paper Input Location 1" and "Custom Size: Paper Input Location 2".