Skip header
 

1. Select Paper Input Location

Specify the paper input location to be used.

Settings

  • System Default

  • Ppr Input 1: Reg(Portrat)

  • Ppr Input 1: Reg(Landscp)

  • Ppr Input 1: Custom Size

  • Ppr Input 2: Reg(Portrat)

  • Ppr Input 2: Reg(Landscp)

  • Ppr Input 2: Custom Size

  • Paper Bypass

Default: System Default

Behavior

  • If "System Default" is selected as the paper input location, the paper input location selected by "Paper Input Priority: Printer" on the "Tray Paper Settings" tab of "System Settings" is used.

Conditions

  • If a paper size is selected in "2. Paper Size", this setting is ignored.

  • If "On" is selected for "U. Auto Paper Select", this setting is ignored.

  • If paper cannot be fed from the paper input location specified in this setting due to the limitations of the machine's printer functions, the paper is fed from the paper input location displayed on the control panel.

  • If either of "tray", "paper", or "autopaper" is specified in the printing option, this setting is ignored.

  • If Rotate Sort is specified in PJL or its relevant printing option, paper may be fed from a paper input location that differs from the selected paper input location.

Note

  • If Auto Paper Input Switching is enabled, paper may be fed from a paper input location that differs from the selected paper input location. To specify a paper input location, select "Auto" or "Off" in "4. Auto Paper Input Switching", or specify the "noautotray" printing option.

  • "Ppr Input 2: Reg(Portrat)", "Ppr Input 2: Reg(Landscp)", and "Ppr Input 2: Custom Size" appear on "1. Select Paper Input Location" only when the optional Paper Input Location 2 is attached.