Using DHCP

You can use the printer in a DHCP environment. You can also register the printer NetBIOS name on a WINS server when it is running.

Printers that register the printer NetBIOS name on a WINS server must be configured for the WINS server.
Supported DHCPv4 servers are Microsoft DHCP Server included with Windows Server 2003/2003/2008/2008 R2, and the DHCP server included with UNIX.
Supported DHCPv6 servers are Microsoft DHCP Server included with Windows Server 2008/2008 R2, and the DHCP server included with UNIX.
DHCPv6 function is not available with WINS server.
If you do not use the WINS server, reserve the printer's IP address in the DHCP server so the same IP address is assigned every time.
To use the WINS server, change the WINS server setting to "active" using the control panel.
Using the WINS server, you can configure the host name via the remote network printer port.
DHCP relay-agent is not supported. If you use DHCP relay-agent on a network via ISDN, it will result in increased line charges. This is because your computer connects to the ISDN line whenever a packet is transferred from the printer.
If there is more than one DHCP servers, use the same setting for all servers. The machine operates using data from the DHCP server that responds first.