Nozzles
Black: 768 nozzles
Cyan, magenta, and yellow: 192 nozzles per color
Configuration:
Console
Original scanning:
Original feed image scanning over fixed contact image sensor
Copy process:
GelSprinter
Resolution:
Scanning originals: 600 dpi
Copying: 600 dpi
Original reference position:
Center
Warm-up time (20 °C (68 °F), rated voltage):
40 seconds
Originals:
Sheet
Maximum original size:
(mainly Europe)
914.4 × 15,000 mm
(mainly North America)
36 × 590.5 inches (49.2 ft.)
Paper size:
Paper Input Location 1:
279.4 × 210.0 mm–914.4 × 15,000 mm (11.00 × 8.27 inches–36.00 × 590.55 inches)
Paper bypass location:
279.4 × 210.0 mm–914.4 × 2,000 mm (11.00 × 8.27 inches–36.00 × 78.74 inches)
Paper weight:
Paper Input Location 1: 51–190g/m2 (14–51 lb.) (0.068–0.2 mm)
Paper bypass location: 51–220g/m2 (14–59 lb.) (0.068–0.4 mm)
Non-reproduction area (Copier):
Leading edge: 3 mm (0.12 inches) or less
Trailing edge:
Paper Input Location 1: 3 mm (0.12 inches) or less
Paper bypass location: 18 mm (0.71 inches) or less (21 mm (0.83 inches) or less depending on paper type or set functions)
Left and right edges: 3 mm (0.12 inches) or less
First copy/print time:
Speed priority mode
Full Color: 155 seconds (A0), 84 seconds (A1
)
B&W: 51 seconds (A0), 29 seconds (A1
)
Standard mode
Full Color: 244 seconds (A0), 131 seconds (A1
)
B&W: 71 seconds (A0), 41 seconds (A1
)
Copying speed:
Standard mode:
Full Color: 0.3 copies/minute (A0(E)), 0.6 copies/minute (A1(D)
)
B&W: 1.1 copies/minute (A0(E)), 2.0 copies/minute (A1(D)
)
Reproduction ratio:
(mainly Europe)
Preset reproduction ratios:
Enlargement: 400.0%, 282.8%, 200.0%, 141.4%
Full size: 100%
Reduction: 70.7%, 50.0%, 35.4%, 25.0%
(mainly North America)
Preset reproduction ratios:
Engineering:
Enlargement: 400.0%, 258.8%, 200.0%, 129.4%
Full size: 100.0%
Reduction: 64.7%, 50.0%, 32.4%, 25.0%
Architecture:
Enlargement: 400.0%, 266.7%, 200.0%, 133.3%
Full size: 100.0%
Reduction: 66.7%, 50.0%, 33.3%, 25.0%
Zoom: From 25.0 to 400.0% in increments of 0.1%
Maximum continuous copy run:
99 sheets
Copy paper feed method:
Paper Input Location 1, paper bypass location
Power requirements:
(mainly Europe)
220–240 V, 1.9 A, 50/60 Hz
(mainly North America)
120–127 V, 3.6 A, 60 Hz
Power consumption:
Main unit only(mainly Europe)
Stand-by: 80 W
During printing: 140 W
Maximum: 160 W
The power level when the main switch is turned off and the power cord is plugged into an outlet: 1 W or less
Main unit only(mainly North America)
Stand-by: 70 W
During printing: 140 W
Maximum: 170 W
The power level when the main switch is turned off and the power cord is plugged into an outlet: 1 W or less
Complete system
Maximum: 180 W
The complete system consists of the main unit with the file format converter, Copy Data Security unit, Gigabit Ethernet, and Wireless LAN board.
Dimensions (W × D × H):
1,384 × 660 × 1,214 mm (54.5 × 22.1 × 47.8 inches) (Output basket and original output guide not included.)
Space for main unit (W × D):
1,384 × 1,435 mm (54.5 × 56.5 inches)
Noise emission:
Sound power level:
Main unit only |
Complete system |
|
---|---|---|
Stand-by |
40 dB (A) |
40 dB (A) |
Copying |
68 dB (A) (B&W) 66 dB (A) (Full Color) |
68 dB (A) (B&W) 66 dB (A) (Full Color) |
Sound pressure level:
Main unit only |
Complete system |
|
---|---|---|
Stand-by |
34 dB (A) |
34 dB (A) |
Copying |
62 dB (A) (B&W) 60 dB (A) (Full Color) |
62 dB (A) (B&W) 60 dB (A) (Full Color) |
Sound power level and sound pressure level are actual values measured in accordance with ISO 7779.
Sound pressure level is measured from the position of the bystander.
The complete system consists of the main unit with Paper Input Location 2.
Weight:
Approx. 120 kg (264.6 lb.)
Operating environment
Temperature: 10–32°C (50–89.6F°)
Humidity: 15–80% (maximum wet-bulb temperature: 25°C (77F°))
Printing may stop to protect the machine for conditions outside those described above.