The machine automatically detects the original size and then selects an appropriate reproduction ratio based on the paper size you select.
You cannot use the paper bypass location with this function.
This is useful to copy different size originals to the same size paper.
To ensure the print result you require is produced, specify the original orientation before using Auto Reduce / Enlarge. Make sure that the original orientation setting matches the actual orientation of your original. For details, see Original Orientation.
The original sizes and orientations you can use with this function are as follows:
(mainly Europe)
A0, A1, A2, A3, A4, B1 JIS, B2 JIS, B3 JIS, B4 JIS
(mainly North America)
Engineering
E (34 × 44) , D (22 × 34) , C (17 × 22) , B (11 × 17) , A (81/2 × 11)
Architecture
E (36 × 48) , D (24 × 36) , C (18 × 24) , B (12 × 18) , A (9 × 12)
Others
30 × 21, 30 × 42
Press [Auto Reduce / Enlarge].
Select the paper size.
Place the original, and start scanning.
For details about the reproduction ratio to be selected, see "Specifications for the Main Unit", Maintenance and Specifications.
For details about the base point, see Reducing or Enlarging Originals.