Skip header
 

Printing the remaining sets of the document

Important

  • When printing is completed, the stored file will be deleted.

1Press the [Home] key on the top left of the control panel, and press the [Printer] icon on the [Home] screen.

Home key illustration

2Press the [Print Jobs] tab.

Operation panel screen illustration

3Press [Sample Jobs].

4Select the files you want to print.

You can select all the Sample Print files at once by pressing [All Jobs] after selecting a file.

5Press [Print].

6To change the print settings of the document, press [Det.Settings].

For details about the settings that can be configured, see Settings that Can Be Configured on the Control Panel.

7Enter the number of copies using the number keys if necessary, and then press [Resume Prt.].

Note

  • If you change the number of copies when multiple documents are selected, the newly specified number of copies will be printed for all of the selected documents. If you do not change the number, the number of copies specified when the documents were stored will be printed for each document.

  • To stop printing after printing has started, press [Job Reset] or the [Stop] key on the [Printer] screen. The file will be deleted.

  • You can also print a Sample Print file from Web Image Monitor. For details, see Web Image Monitor Help.