Previous
You can print documents sent from Specified Senders on paper from the bypass tray.
In [Program Special Sender] in the Facsimile Features menu, set as follows:
Program a special sender and select the bypass tray for the paper tray type.
Turn on the [Special Reception Function] in [Initial Set Up].
For details about Program Special Sender, see Special Senders to Treat Differently
.
You can use a size of paper not loaded in the paper tray(s) in the bypass tray.
For details about the bypass tray's paper capacity, automatically detectable paper size, and the custom size paper that can be loaded, see "Recommended Paper", Paper Specifications and Adding Paper.
When you load the paper of undetectable size, specify the paper size. However, if the size of the paper on the bypass tray does not match the specified paper size, a message will appear on the display prompting you to load paper of the specified size. When you have loaded the paper, press [Exit] to print the document.
Documents printed on paper smaller than A4 (81/2 × 11) may be shortened, or split across sheets.
Paper that is larger in size than the maximum may be creased, not sent, or jam.
Print area depends on the machine's configuration, resolution, and vertical length of originals.
If you use this function, Image Rotation and 180-degree rotating printing are not possible.
