Skip header
 

Margin Adjustment

Copies an original so that a binding margin is created.

Illustration of Margin Adjustment

The factory default creates a 5 mm (0.2 inches) margin on the left front side and the right back side. You can change the settings under [Edit] in User Tools. For details, see Edit.

1Press [Other Func.].

Operation panel screen illustration

2Press [Down arrow key].

3Make sure that [Margin Adjustment] is selected. If [Margin Adjustment] is not selected, press [Margin Adjustment].

4Press [OK].

5Place the originals, and then press the [Start] key.

Note

  • When making copies in Combine mode, the binding margin is added to the copies after the combination is finished.