Previous
You can specify the reproduction ratio in increments of 1%.
To specify a reproduction ratio, enter the ratio using the number keys or specify the ratio with [
] or [
].
This section describes how to enter the ratio using the number keys.
Press [Red./Enlg.].
Press [Magnification Ratio].
Enter the desired ratio with the number keys, and then press [
].
Press [OK] twice.
Place the originals, and then press the [Start] key.
When specifying the ratio with [
] or [], press [Red./Enlg.], and then select a preset ratio which is close to the desired ratio. Pressing [] or [] changes the ratio in increments of 1%. Pressing and holding down [] or [] changes it in increments of 10%.The reproduction ratio is between 25 and 400%.
You can select a ratio regardless of the size of an original or copy paper. With some ratios, parts of the image might not be copied or margins will appear on copies.
For details about the base point, see Reducing or Enlarging Originals
.
