Skip header
 

Top Page > Operating Instructions > Maintenance and Specifications > Paper Specification > Print Area

Print Area

The following shows the recommended print area for this printer.

Illustration of print area for paper numbered callout illustration

  1. Print area

  2. Feed direction

  3. 2.7 to 5.7 mm (0.11 to 0.23 inches)

  4. 0.5 to 6.0 mm (0.02 to 0.24 inches)

  5. 0.5 to 4.0 mm (0.02 to 0.16 inches)

  6. 0.5 to 4.0 mm (0.02 to 0.16 inches)

Note

  • The print area may vary depending on the paper size, printed language and printer driver settings.

  • Depending on the printer driver settings, you may be able to print outside the recommended print area. However, the actual output may not be as desired, or a paper feed problem may occur.

  • If [Edge to Edge Print] under [System] in [Printer Features] is enabled, the margins on the left, right, and bottom edges in relation to the feed direction will become 0 mm. For details about [Edge to Edge Print], see System.

PreviousNext