Previous
When using paper other than the standard types, specks of paper may stick on the registration roller, causing problems. Clean the registration roller if white dots appear on prints.
.
|
Do not use chemical cleaners or organic solvents such as thinners or benzene.
Turn off the printer and unplug the power cord.
Push up the lever on the right side, and open the printer's right cover carefully.
The registration roller is installed as shown below:
Clean the registration roller by applying a soft damp cloth while turning it.
Do not touch the belt of the roller when cleaning.
Close the right cover.
Plug in the power cord and turn on the printer.
