Previous
Refer to the maintenance guide provided with the new items for the replacement. |
|
|
|
Exposure to light reduces black drum unit/color drum units performance. Replace the unit as quickly as possible.
Do not pull out the black drum unit/color drum units quickly or with force as it may fall.
Take care that nothing comes into contact with the top surface of the black drum unit/color drum units.
When holding the black drum unit/color drum units, grab the green grip on the left and the handle on the front together. Do not move the black drum unit/color drum units by only grabbing the grip. Doing so may damage the grip.
Waste toner bottles cannot be reused.
Purchasing and storing extra waste toner bottles is recommended.
Before removing the waste toner bottle from the printer, spread paper or some other material around the area to keep toner from dirtying your workspace.
Black Drum Unit/Color Drum Unit
Replace the drum unit when the following messages appear on the display:
“Replacement of Black Photoconductor Unit is now necessary. Replace Black Photoconductor Unit.”
“Replacement of Color Photoconductor Unit is now necessary. Replace Color Photoconductor Unit.”
When the following message appears on the display, the drum unit should be replaced soon.
“Replacement of Black Photoconductor Unit will soon be necessary. A new Black Photoconductor Unit is required. Please contact your local vendor.”
“Replace Black Photoconductor Unit. Press either the Check Status key or the remaining supply display to check information about supplies.”
“Replacement of Color Photoconductor Unit will soon be necessary. A new Color Photoconductor Unit is required. Please contact your local vendor.”
“Replace Color Photoconductor Unit. Press either the Check Status key the remaining supply display to check information about supplies.”
Waste toner bottle
Replace the waste toner bottle when the following message appears on the display:
“Waste Toner Bottle is full. Replace the bottle.”
When the following message appears on the display, the waste toner bottle should be replaced soon.
“Waste Toner Bottle is almost full. A new Waste Toner Bottle is required. Please contact your local vendor.”
Fusing unit
Replace the fusing unit when the following message appears on the display:
“Replacement of Fusing Unit is now necessary. Replace Fusing Unit.”
When the following message appears on the display, the fusing unit should be replaced soon.
“Replace Fusing Unit. Press either the Check Status key or the remaining supply display to check information about supplies.”
Transfer unit
Replace the transfer unit when the following message appears on the display:
“Replacement of Transfer Unit is now necessary. Replace Transfer Unit.”
When the following message appears on the display, the transfer unit should be replaced soon.
“Replace Intermediate Transfer Unit. Press either the Check Status key or the remaining supply display to check information about supplies.”
