Skip header
 

Top Page > Operating Instructions > Printing > Printing Files from a Memory Storage Device > Direct Printing from a Digital Camera (PictBridge) > PictBridge printing

PictBridge printing

1Check the printer and the digital camera are both switched on.

2Using a USB cable, connect the digital camera to the printer's USB port A or the media slot.

For details about connecting the digital camera to the printer's USB port A, see Digital camera connection. For details about connecting the device via the media slot, see Inserting/Removing a Memory Storage Device.

3On your digital camera, select the images you want to print, and specify the printing conditions.

4The printer receives settings from the digital camera and starts printing.

Note

  • Since printing conditions are specified on the digital camera, specifiable meters depend on the particular digital camera. For details, see your digital camera's manual.

  • Some digital cameras require settings for manual PictBridge operation. For details, see your digital camera's manual.

PreviousNext