Skip header
 

Top Page > Operating Instructions > Printing > Printing Files from a Memory Storage Device > Direct Printing from a Memory Storage Device > Screen for direct printing

Screen for direct printing

To display this screen, press the [Printer] icon on the [Home] screen, and then press [Prt. From Dev.]. You can view files either as a list or as thumbnails.

Operation panel screen illustration numbered callout illustration

  1. Current folder

    Displays the name and path of the current folder. To display the contents of the parent folder, press [Up1L].

  2. File/Folder list

    Press to select the file you want to print or the folder you want to open. Press [Up arrow key] or [Down arrow key] to scroll through the list if necessary. Depending on the number of files, up to 999 pages might be shown.

    The formats, names, and sizes of files are displayed. If multiple files are selected, the order in which the files were selected will also be displayed.

  3. [dev. slct.]

    Press to display the removable memory device selection screen.

  4. Selected

    Displays the number of selected documents (1–999).

  5. Qnty.:

    Press to specify the number of the copies (1–999) that you want to print.

  6. [Detailed Sett.]

    Press to configure detailed print settings.

  7. [Preview]

    Press to display the print image of the first page of the selected document. You can change the scale factor and display the position of the print image.

  8. [Start Printing]

    Press to print the selected file.

  9. List/Thumbnail

    Press to switch between list view and thumbnail view.

Note

  • The printer can recognize up to a total of 5990 files and folders in a memory storage device.

  • File names must not exceed 255 bytes (including the path name). Also, file names must not contain any character that the printer cannot display correctly.

  • JPEG format files can be displayed as thumbnails when they are in Exif or DCF format. An icon will be shown for any other type of file.

  • For details about available paper sizes, see Supported Paper for Each Input Tray.

  • Custom size PDF files may not be printed using this function.

  • Print settings are effective for the format of the currently selected file, and will remain effective as long as the file of that format stays selected.

  • The printer will remember an entered PDF password until you switch out of the printer function.

  • If you try to select a memory storage device that the printer has not recognized correctly, an error message will appear.

PreviousNext