Previous
Configuration:
Desktop
Print process:
Laser beam scanning and electro-photographic printing
First print speed:
3.5 seconds
(A4
or 81/2 × 11)
Print speed:
50 pages per minute (A4 or 81/2 × 11)
Resolution:
600 × 600 dpi, 400 × 400 dpi, 300 × 300 dpi, 200 × 200 dpi
Paper size:
For details, see Supported Paper for Each Input Tray
Paper weight:
For details, see Supported Paper for Each Input Tray
Paper input capacity:
For details, see Supported Paper for Each Input Tray
Paper output capacity:
For details, see Supported Paper for Each Output Tray
Power requirements:
(mainly Europe and Asia)220–240 V, 7 A, 50/60 Hz
(mainly North America)120–127 V, 12 A, 60 Hz
Power consumption:
Main unit only
Ready
153 W
148 W
During printing
828 W
805 W
Maximum
1,440 W
The power level when the main switch is turned off and the power cord is plugged into an outlet: 1 W or less
Complete system
Maximum
1,470 W
1,550 W
The complete system consists of the main unit, 1000-sheet paper feed unit, 1200-sheet paper feed unit, bridge unit and 3000-sheet finisher.
Warm-up time (23 °C (73.4 °F), rated voltage):
25 seconds
Dimensions (W × D × H):
670 × 677 × 641 mm (26.4 × 26.7 × 25.3 inches)
Space for the main unit (W × D)
1,065 × 677 mm (42.0 × 26.7 inches)
Weight:
Approx. 73 kg (161.0 lb.)
Noise emission:
Sound power level:
Main unit only
Stand-by
33.2 dB (A)
Printing
66.9 dB (A)
Complete system
Stand-by
33.5 dB (A)
Printing
72.7 dB (A)
Sound pressure level:
Main unit only
Stand-by
20.3 dB (A)
Printing
56.0 dB (A)
Complete system
Stand-by
20.5 dB (A)
Printing
60.8 dB (A)
Sound power level and sound pressure level are actual values measured in accordance with ISO 7779.
Sound pressure level is measured from the position of the bystander.
The complete system consists of the main unit, 1000-sheet paper feed unit, 1200-sheet paper feed unit, bridge unit and 3000-sheet finisher.
Memory:
Standard 512 MB, up to 1 GB (with the optional SDRAM module)
Hard disk:
160 GB (Optional)
Interfaces:
Standard:
Ethernet (10BASE-T/100BASE-TX)
USB 2.0
To use USB 2.0, a USB computer port and cable that support USB 2.0 are required.
USB Host
SD card slot
Optional:
IEEE 802.11a/b/g (Wireless LAN)
Parallel (Bidirectional IEEE 1284)
Gigabit Ethernet (1000BASE-T)
Printer Language:
PCL5e/6, PostScript 3, PDF
Fonts:
PCL 5e/PCL 6:
45 fonts, 13 International fonts
PostScript 3, PDF:
136 fonts
Network:
Topology: The physical or logical layout of the nodes (devices) in a network. (10BASE-T/100BASETX/1000BASE-T)
Protocol: TCP/IP (IPv4, IPv6), IPX/SPX
