Maintenance: Image

Adjusting the print image density can prevent faint spots or smears appearing on printed pages. You can specify a density value between -3 and 3.

Only change this setting from its default value if necessary. For details, see When the Image Density Changes.

You can adjust the starting position of the printing page. For details, see When the Printing Position Changes.

• Print Test Sheet

  You can print the registration test sheet.

  Only the installed trays appear on the display panel.

  • Paper Tray 1–4

  • LCT

  • Bypass Tray

  • Duplex Unit

• Adjust Position

  You can select the start position for printing on a page.

  Only the installed trays appear on the display panel.

  • Vertical: Tray 1–4

  • Vertical: LCT

  • Vertical: Bypass Tray

  • Vertical: Back Side

  • Horizontal: All Trays

  • Horizontal: Bypass Tray

  • Horizontal: Back Side