List / Test Print

You can print the configuration page and error log, network summary and supply list.

You can print the printer's current configuration values. For details, see Interpreting the configuration page.

You can print error logs listing all errors that occurred during printing. The most recent 30 errors are stored in the error log. If a new error is added when there are 30 errors already stored, the oldest error is deleted. However, if the oldest error belongs to one of the following types of print jobs, it is not deleted. Instead, it will be stored separately in error logs for each job type, up to a maximum of 30 for each log. You can check any of these print jobs for error log information.

• Sample Print

• Locked Print

• Hold Print

• Stored Print

The records of jobs canceled automatically and manually from the control panel can be printed.

You can print the network device status.

You can print the supply status.

You can print a menu list showing the printer's function menus.

You can print the current configuration and installed PCL font list.

You can print the current configuration and installed PostScript font list.

You can print the current configuration and installed PDF font list.

You can print in the Hex Dump mode.

Use this to check the printer and its options for operability, including paper feed and output, punching and stapling. Only settings of installed options are displayed. If a specified function fails, the printer displays a message and stops printing. If the test is successful, the printer prints black frames.