Previous
For each user registered in the Address Book, you can register a login user name and login password to be used when accessing an LDAP server.
To use an LDAP server, you need to program it beforehand. For details, see Programming the LDAP Server
.
When [Do not Specify] is selected for [LDAP Authentication], the User Name and Password that you have specified in [Program/Change LDAP Server] of [Administrator Tools] settings are applied. For details, see Programming the LDAP Server
.If User Authentication is specified, contact your administrator.
Press [Change] on the [Address Book Mangmnt] screen.
For details about how to access the [Address Book Mangmnt] screen, see Displaying the Printer Configuration Screens Using the Control Panel.
Select the item you want to display from [All Users] or [User Code].
Press the name you want to register or enter the registered number using the number keys.
You can search by the registered name, user code, or e-mail address.
Press [Auth. Info].
Press [LDAP Authentication].
Press [Specify Other Auth. Info].
Press [Change] under "Login User Name".
Enter the login user name, and then press [OK].
Press [Change] under "Login Password".
Enter the password, and then press [OK].
Enter the password again to confirm, and then press [OK].
Press [OK].
Press [Exit].
Press [OK].
Press the [User Tools] key.
To register the name, see Registering User Information
.You can enter up to 128 characters for user name and password.
