Skip header
 

Configuring the Virtual Printer

1Log in to Web Image Monitor in administrator mode.

For details about logging in, see Displaying the Printer Configuration Screens Using a Web Browser.

2Click [Configuration] on the [Device Management] menu.

3Under "Printer", click [Virtual Printer Settings].

4Select the virtual printer whose configuration you want to change, and then click [Change].

5Change the configuration as required, and then click [OK].

If you want to configure this virtual printer for an interrupt printer, select [TCP/IP (Unspecified, Priority)] in the "Protocol" list.

6Click [Logout].

7Quit Web Image Monitor.

Note

  • For details about virtual printer configuration, see Web Image Monitor Help.