Skip header
 

Adding a Virtual Printer

1Log in to Web Image Monitor in administrator mode.

For details about logging in, see Displaying the Printer Configuration Screens Using a Web Browser.

2Click [Configuration] on the [Device Management] menu.

3Under "Printer", click [Virtual Printer Settings].

4Click [Add].

5In "Virtual Printer Name", enter a name for the new printer, and then select the protocol in the "Protocol" list.

The following Virtual Printer protocols are available: [TCP/IP (Unspecified, Normal)], [TCP/IP (Unspecified, Priority)], [TCP/IP (RHPP)], [TCP/IP (DIPRINT)], and [NetWare].

If you select [TCP/IP (DIPRINT)], or [NetWare] in the "Protocol" list, you cannot specify a virtual printer name.

6Click [OK].

7Click [Logout].

8Quit Web Image Monitor.

Note

  • You can add up to 50 virtual printers. After 51 virtual printers have been added, [Add] will no longer be displayed.