Registration
Follow the procedure below to adjust where to start printing on paper loaded in each paper tray after checking the test pattern printed.
Press the [User Tools] key.
Press [Login].
Enter the login password, and then press the [OK] key.
Press the [
] or [
] key to display [Maintenance], and then press the [OK] key.
Press the [] or [] key to display [Registration], and then press the [OK] key.
Press the [] or [] key to select a paper tray, and then press the [OK] key.
Press the [B&W Start] or [Color Start] key.
A test pattern to adjust the print start position is printed.
Check the optimal adjustment values on the printed test pattern.
Fold the test pattern sheet in half lengthwise.
The optimal adjustment value is the difference between the single vertical line and the cross's vertical line that you can see when the folded paper is held up to light. When the difference is one calibration mark in the "+" direction, the optimal adjustment value for the [Main Scan] is "+1.0".
Fold the test pattern sheet in half widthwise, and then check the adjustment value for the [Sub Scan].
Adjustment values are in 0.1 increments.
Press [Adjust].
Press the [] or [] key to enter the adjustment values (-4.0 to +4.0) in the [Main Scan] from step 9, and then press the [OK] key.
Press the [] or [] key to enter the adjustment values (-4.0 to +4.0) in the [Sub Scan] from step 10, and then press the [OK] key.
Press [Exit].
Press the [Escape] key.
