Skip header
Help
 

Maintenance > Replacing a Print Cartridge > Replacing a Print Cartridge

Replacing a Print Cartridge

Clear any errors, such as when there is a paper jam or when no paper is loaded, before replacing a print cartridge.

CAUTION

  • Keep ink and ink containers out of reach of children.

  • If ink gets into contact with eyes, wash eyes immediately with running water. Consult a doctor if necessary.

  • If ink is ingested, induce vomiting by drinking a strong saline solution. Consult a doctor immediately.

  • When removing jammed paper or replacing ink, avoid getting ink on your clothing. If ink comes into contact with your clothing, wash the stained area with cold water. Hot water will set the ink into the fabric and make removing the stain impossible.

  • When removing jammed paper or replacing ink, avoid getting ink on your skin. If ink comes into contact with your skin, wash the affected area thoroughly with soap and water.

  • When removing the print cartridge, avoid putting your hand near the place where the print cartridge is installed. If ink comes in contact with your hands, wash them thoroughly with soap and water.

Important

  • When installing the print cartridge, do not touch the inside of the machine.

  • Carefully install a cartridge in the correct position.

1Take the print cartridge out of the box.

2Open the right front cover.

machine body illustration

3Take out the empty cartridges.

While taking out the cartridges, be sure to hold the machine firmly so that it does not move.

print cartridge illustration

4Check the cartridges' orientation, and then install them carefully.

Install in the following order from the left: black, cyan, magenta, and yellow.

5Push each cartridge fully in.

print cartridge illustration

6Close the right front cover.

machine body illustration