Skip header
Help
 

Machine Setup Menus > System Settings > General Features

General Features

This section describes the user tools in the [General Features] menu under [System Settings].

Prog/Change/Del User Text

You can register text phrases you often use when specifying settings, such as ".com" and "Regards".

You can register up to 20 entries.

Panel Key Sound (SG 3110SFNw only)

The beeper (key tone) sounds when a key is pressed.

  • Lowest

  • Low

  • Medium

  • High

  • Off

Default: [Medium]

Warm-up Beeper (copier) (SG 3110SFNw only)

You can have the beeper sound when the machine becomes ready to copy after leaving Energy Saver mode, or when the power is turned on.

Default: [On]

If the [Panel Key Sound] setting is [Off], the beeper does not sound, whatever the [Warm-up Beeper] setting.

Function Priority

Specify the mode to be displayed immediately after the operation switch is turned on, or when System Reset mode is turned on.

SG 3100SNw

  • Copier

  • Printer

  • Scanner

SG 3110SFNw

  • Copier

  • Printer

  • Scanner

  • Facsimile

Default: [Copier]

Display Cntrst.

You can adjust the brightness of the display.

Default: [0] (the halfway/medium setting).

Key Repeat

You can enable or disable repetition of an operation if a key on the control panel is pressed continuously.

  • Do not Repeat

  • Normal

  • Repeat Time: Medium

  • Repeat Time: Long

Default: [Normal]

Measurement Unit

You can switch the measurement between "mm" and "inch".

Default:

Region A icon(mainly Europe and Asia)

[mm]

Region B icon(mainly North America)

[inch]

Note