Flush Print-heads
Follow the procedure below to perform a thorough print head cleaning. Because head flushing consumes more ink than head cleaning, do it only if the print head cannot be cleaned properly by head cleaning.
When the print cartridge is empty, replace it instead of performing a print head cleaning. After a print cartridge is replaced, a print head cleaning will be automatically performed.
Do not turn the machine off during print head cleaning. If the machine is turned off during print head cleaning, start again from the beginning.
Press the [User Tools] key.
Press [Login].
Enter the login password, and then press the [OK] key.
Press the [
] or [
] key to display [Maintenance], and then press the [OK] key.
Press the [] or [] key to display [Flush Print-heads], and then press the [OK] key.
Press the [] or [] key to select the print head of the appropriate color.
Check an item by pressing the [
] key, and then press the [OK] key.
To clean all the print heads, select [All Heads].
To clean the print head for black and cyan, select [Head 1].
To clean the print head for yellow and magenta, select [Head 2].
Press [Yes].
Head flushing starts.
Press [Exit].
Press the [Escape] key.
