Skip header
Help
 

Canceling a fax

Follow the procedure below to cancel a fax job if:

The original is being scanned or transmitted

Use this procedure to cancel a fax job while the machine is scanning or sending the original.

If you cancel the fax job during broadcasting, only the fax that is sent to the current destination is canceled. The fax will be sent to the other destinations.

  1. Press the [Clear/Stop] key.

The transmission is started

Use this procedure to cancel a fax job stored in memory.

  1. Press the [Facsimile] key.

  2. Press [TX Mode].

  3. Press the [Up arrow key] or [Down arrow key] key to display [Job Information], and then press the [OK] key.

  4. Press the [Up arrow key] or [Down arrow key] key to display [Check/Stop TX File], and then press the [OK] key.

  5. Press the [Up arrow key] or [Down arrow key] key to select the desired destination, and then press the [OK] key.

  6. Press [Stop TX], and then [Delete].