Skip header
Help
 

Using the Copier Function > Making Enlarged or Reduced Copies

Making Enlarged or Reduced Copies

This section explains how to specify the reduction or enlargement ratio for the current job.

Scaling

There are two ways to set the scaling ratio: using a preset ratio or manually specifying a customized ratio.

  • Preset ratio

    Illustration of Preset ratio

    region-a(mainly Europe and Asia)

    50% (A4 A6)

    61% (A4 B6JIS)

    65%

    71% (A4 A5, A5 A6)

    82% (B5JIS A5)

    93%

    100%

    115% (B5JIS A4)

    122% (A5 B5JIS, A6 B6JIs)

    141% (A5 A4, A6 A5)

    200% (A6 A4)

    400%

    region-b(mainly North America)

    50% (LT HLT)

    65%

    73%

    85%

    93%

    100%

    129% (HLT LT)

    155% (HLT LG)

    400%

  • Custom ratio

    Illustration of Custom ratio

    25% to 400% in 1% increments.

1Press the [Copy] key.

2Press the [Reduce/Enlarge] key.

Reduce/Enlarge key illustration

3Press [R/E].

4Press [Reduce] or [Enlarge], and then press the [Up arrow key] or [Down arrow key] keys to select the desired ratio, and then press the [OK] key.

If [Zoom] has been selected, specify the desired ratio using the number key, and then press the [OK] key.

5Place the originals, and then the [B&W Start] or [Color Start] key.

Note

  • You can specify the presets displayed in [Reproduction Ratio] in [Copier Features]. For details, see Copier Features.

  • To always apply the same reproduction ratio, specify [Preset R/E Priority] in [Copier Features]. For details, see Copier Features.