Skip header
Help
 

Using the Copier Function > Basic Operation in Copier Mode > SADF Mode

SADF Mode

In the SADF mode, you can feed multiple-page originals, which may be prone to multiple-feed, page by page from the ADF.

1Press the [Copy] key.

2Press [Function].

3Press the [Up arrow key] or [Down arrow key] keys to display [SADF Copy], and then press the [OK] key.

Normally, the copier mode is set to [Normal Copy].

4Place one page of an original, and then press the [B&W Start] or [Color Start] key.

5If the machine prompts you to place another original, place the next page, and then press the [B&W Start] or [Color Start] key.

If [2Sd/Comb] has been enabled the second and subsequent pages will be fed automatically without pressing the [B&W Start] or [Color Start] key.

6Press the [Sharp] key after all originals have been scanned.

Note

  • You cannot switch between [2Sd/Comb], [Sort] and [Reduce/Enlarge] during copying.